VirtualBox and two separates NATs

Aim is to create two networks (10.0.2.x and 10.0.3.x) in VirtualBox and be enable ip routing between them. At first there is no default routing (AFAIK) implemented in VirtualBox for such a scenario, thus the creation of a separate router is required.

There are two separates networks 10.0.2.x and 10.0.3.x defined in VirtualBox


Further more we need for such an example 3 virtual machines:
• router with two networks (10.0.2.x and 10.0.3.x)
• ipa2 network 10.0.2.39/24
• ipa3 network 10.0.3.5/24
Both ipa2 and ipa3 have virbr0 for internet connection (i.e. package updates)

Network on “router”

[tomas@router ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 08:00:27:a7:20:28 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.4/24 brd 10.0.2.255 scope global noprefixroute enp0s3
valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 08:00:27:ea:77:c4 brd ff:ff:ff:ff:ff:ff
inet 10.0.3.4/24 brd 10.0.3.255 scope global noprefixroute enp0s8
valid_lft forever preferred_lft forever
[tomas@router ~]$ ip r
default via 10.0.3.1 dev enp0s8 proto static metric 101
10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.4 metric 100
10.0.3.0/24 dev enp0s8 proto kernel scope link src 10.0.3.4 metric 101

Enable ipv4 forwarding in kernel

[tomas@router ~]$ sudo sysctl net.ipv4.ip_forward=1
net.ipv4.ip_forward = 1[tomas@router ~]$ sudo sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1

Network Connection on ipa2 (ipa3 is similar)

[tomas@ipa2 ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 08:00:27:e5:0e:7b brd ff:ff:ff:ff:ff:ff
inet 10.0.2.39/24 brd 10.0.2.255 scope global noprefixroute enp0s3
valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:e1:ad:57 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever

Additional routing for 10.0.3.x network:

[tomas@ipa2 ~]$ sudo nmcli connection modify enp0s3 +ipv4.routes "10.0.3.0/24 10.0.2.4"[tomas@ipa2 ~]$ sudo nmcli connection down enp0s3 [tomas@ipa2 ~]$ sudo nmcli connection up enp0s3 
[tomas@ipa2 ~]$ ip r
default via 10.0.3.1 dev enp0s3 proto static metric 100
10.0.2.0/24 dev enp0s3 proto kernel scope link src 10.0.2.39 metric 100
10.0.3.0/24 via 10.0.2.4 dev enp0s3 proto static metric 100
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown

Checks

[tomas@ipa2 ~]$ ping 10.0.3.5
PING 10.0.3.5 (10.0.3.5) 56(84) bytes of data.
64 bytes from 10.0.3.5: icmp_seq=1 ttl=63 time=1.94 ms
[tomas@ipa3 ~]$ ping 10.0.2.39
PING 10.0.2.39 (10.0.2.39) 56(84) bytes of data.
64 bytes from 10.0.2.39: icmp_seq=1 ttl=63 time=0.899 ms

Backup und Wiederherstellung von MySQL Datenbank

Backup

Der Backup kann entweder von allen Datenbanken erfolgen:

sudo mysqldump --all-databases > /tmp/mysqldump.sql

mysqldump -u root -p --all-databases > /tmp/mysqldump.sql

oder mit nur eine Datenbank (Beispiel xwiki)

sudo mysqldump -u root -p xwiki > /tmp/xwiki.sql

Wiederherstellung

Wenn nur eine Datenbank wiederherstellt werden soll, dann muss die Ziel-Datenbank eingegeben werden:

mysql -u root -p --database=xwiki < /tmp/xwiki.sql

Weitere Information in https://dev.mysql.com/doc/refman/5.7/en/mysqldump-sql-format.html

Virtual Box: Die vorhandene VDI Festplatten vergrößern

Wie kann eine vorhandene VDI (Virtual Drive) Festplatte in Virtual Box vergrößern? In der GUI der Virtual Box (Version 5.1) gibt es keine Option. Die einzige mir bekannte Lösung ist VBoxManage.exe (C:\Program Files\Oracle\VirtualBox\VBoxManage.exe).

Der Aufruf erfolgt mit: VBoxManage.exe modifyhd "Absoluten Adresse zu VDI" --resize <neue Größe in MB>

Beispiel um eine vorhandene VDI Festplatte auf 40GB zu erhöhen C:\Program Files\Oracle\VirtualBox\VBoxManage.exe modifyhd C:\tomas\ubuntu\ubuntu.vdi --resize 40960

Weiteren VBoxManager Parameter :

Oracle VM VirtualBox Command Line Management Interface Version 5.1.6
(C) 2005-2016 Oracle Corporation
All rights reserved.

Usage:

VBoxManage [<general option>] <command>
 
 
General Options:
 
 [-v|--version] print version number and exit
 [-q|--nologo] suppress the logo
 [--settingspw <pw>] provide the settings password
 [--settingspwfile <file>] provide a file containing the settings password
 
 
Commands:
 
 list [--long|-l] vms|runningvms|ostypes|hostdvds|hostfloppies|
 intnets|bridgedifs|hostonlyifs|natnets|dhcpservers|
 hostinfo|hostcpuids|hddbackends|hdds|dvds|floppies|
 usbhost|usbfilters|systemproperties|extpacks|
 groups|webcams|screenshotformats

showvminfo <uuid|vmname> [--details]
 [--machinereadable]
 showvminfo <uuid|vmname> --log <idx>

registervm <filename>

unregistervm <uuid|vmname> [--delete]

createvm --name <name>
 [--groups <group>, ...]
 [--ostype <ostype>]
 [--register]
 [--basefolder <path>]
 [--uuid <uuid>]

modifyvm <uuid|vmname>
 [--name <name>]
 [--groups <group>, ...]
 [--description <desc>]
 [--ostype <ostype>]
 [--iconfile <filename>]
 [--memory <memorysize in MB>]
 [--pagefusion on|off]
 [--vram <vramsize in MB>]
 [--acpi on|off]
 [--pciattach 03:04.0]
 [--pciattach 03:04.0@02:01.0]
 [--pcidetach 03:04.0]
 [--ioapic on|off]
 [--hpet on|off]
 [--triplefaultreset on|off]
 [--apic on|off]
 [--x2apic on|off]
 [--paravirtprovider none|default|legacy|minimal|
 hyperv|kvm]
 [--paravirtdebug <key=value> [,<key=value> ...]]
 [--hwvirtex on|off]
 [--nestedpaging on|off]
 [--largepages on|off]
 [--vtxvpid on|off]
 [--vtxux on|off]
 [--pae on|off]
 [--longmode on|off]
 [--cpu-profile "host|Intel 80[86|286|386]"]
 [--cpuid-portability-level <0..3>
 [--cpuidset <leaf> <eax> <ebx> <ecx> <edx>]
 [--cpuidremove <leaf>]
 [--cpuidremoveall]
 [--hardwareuuid <uuid>]
 [--cpus <number>]
 [--cpuhotplug on|off]
 [--plugcpu <id>]
 [--unplugcpu <id>]
 [--cpuexecutioncap <1-100>]
 [--rtcuseutc on|off]
 [--graphicscontroller none|vboxvga|vmsvga]
 [--monitorcount <number>]
 [--accelerate3d on|off]
 [--accelerate2dvideo on|off]
 [--firmware bios|efi|efi32|efi64]
 [--chipset ich9|piix3]
 [--bioslogofadein on|off]
 [--bioslogofadeout on|off]
 [--bioslogodisplaytime <msec>]
 [--bioslogoimagepath <imagepath>]
 [--biosbootmenu disabled|menuonly|messageandmenu]
 [--biosapic disabled|apic|x2apic]
 [--biossystemtimeoffset <msec>]
 [--biospxedebug on|off]
 [--boot<1-4> none|floppy|dvd|disk|net>]
 [--nic<1-N> none|null|nat|bridged|intnet|hostonly|
 generic|natnetwork]
 [--nictype<1-N> Am79C970A|Am79C973|
 82540EM|82543GC|82545EM|
 virtio]
 [--cableconnected<1-N> on|off]
 [--nictrace<1-N> on|off]
 [--nictracefile<1-N> <filename>]
 [--nicproperty<1-N> name=[value]]
 [--nicspeed<1-N> <kbps>]
 [--nicbootprio<1-N> <priority>]
 [--nicpromisc<1-N> deny|allow-vms|allow-all]
 [--nicbandwidthgroup<1-N> none|<name>]
 [--bridgeadapter<1-N> none|<devicename>]
 [--hostonlyadapter<1-N> none|<devicename>]
 [--intnet<1-N> <network name>]
 [--nat-network<1-N> <network name>]
 [--nicgenericdrv<1-N> <driver>
 [--natnet<1-N> <network>|default]
 [--natsettings<1-N> [<mtu>],[<socksnd>],
 [<sockrcv>],[<tcpsnd>],
 [<tcprcv>]]
 [--natpf<1-N> [<rulename>],tcp|udp,[<hostip>],
 <hostport>,[<guestip>],<guestport>]
 [--natpf<1-N> delete <rulename>]
 [--nattftpprefix<1-N> <prefix>]
 [--nattftpfile<1-N> <file>]
 [--nattftpserver<1-N> <ip>]
 [--natbindip<1-N> <ip>
 [--natdnspassdomain<1-N> on|off]
 [--natdnsproxy<1-N> on|off]
 [--natdnshostresolver<1-N> on|off]
 [--nataliasmode<1-N> default|[log],[proxyonly],
 [sameports]]
 [--macaddress<1-N> auto|<mac>]
 [--mouse ps2|usb|usbtablet|usbmultitouch]
 [--keyboard ps2|usb
 [--uart<1-N> off|<I/O base> <IRQ>]
 [--uartmode<1-N> disconnected|
 server <pipe>|
 client <pipe>|
 tcpserver <port>|
 tcpclient <hostname:port>|
 file <file>|
 <devicename>]
 [--lpt<1-N> off|<I/O base> <IRQ>]
 [--lptmode<1-N> <devicename>]
 [--guestmemoryballoon <balloonsize in MB>]
 [--audio none|null|dsound]
 [--audiocontroller ac97|hda|sb16]
 [--audiocodec stac9700|ad1980|stac9221|sb16]
 [--clipboard disabled|hosttoguest|guesttohost|
 bidirectional]
 [--draganddrop disabled|hosttoguest]
 [--vrde on|off]
 [--vrdeextpack default|<name>
 [--vrdeproperty <name=[value]>]
 [--vrdeport <hostport>]
 [--vrdeaddress <hostip>]
 [--vrdeauthtype null|external|guest]
 [--vrdeauthlibrary default|<name>
 [--vrdemulticon on|off]
 [--vrdereusecon on|off]
 [--vrdevideochannel on|off]
 [--vrdevideochannelquality <percent>]
 [--usb on|off]
 [--usbehci on|off]
 [--usbxhci on|off]
 [--usbrename <oldname> <newname>]
 [--snapshotfolder default|<path>]
 [--teleporter on|off]
 [--teleporterport <port>]
 [--teleporteraddress <address|empty>
 [--teleporterpassword <password>]
 [--teleporterpasswordfile <file>|stdin]
 [--tracing-enabled on|off]
 [--tracing-config <config-string>]
 [--tracing-allow-vm-access on|off]
 [--usbcardreader on|off]
 [--autostart-enabled on|off]
 [--autostart-delay <seconds>]
 [--videocap on|off]
 [--videocapscreens all|<screen ID> [<screen ID> ...]]
 [--videocapfile <filename>]
 [--videocapres <width> <height>]
 [--videocaprate <rate>]
 [--videocapfps <fps>]
 [--videocapmaxtime <ms>]
 [--videocapmaxsize <MB>]
 [--videocapopts <key=value> [,<key=value> ...]]
 [--defaultfrontend default|<name>]

clonevm <uuid|vmname>
 [--snapshot <uuid>|<name>]
 [--mode machine|machineandchildren|all]
 [--options link|keepallmacs|keepnatmacs|
 keepdisknames]
 [--name <name>]
 [--groups <group>, ...]
 [--basefolder <basefolder>]
 [--uuid <uuid>]
 [--register]

import <ovfname/ovaname>
 [--dry-run|-n]
 [--options keepallmacs|keepnatmacs|importtovdi]
 [more options]
 (run with -n to have options displayed
 for a particular OVF)

export <machines> --output|-o <name>.<ovf/ova>
 [--legacy09|--ovf09|--ovf10|--ovf20]
 [--manifest]
 [--iso]
 [--options manifest|iso|nomacs|nomacsbutnat]
 [--vsys <number of virtual system>]
 [--product <product name>]
 [--producturl <product url>]
 [--vendor <vendor name>]
 [--vendorurl <vendor url>]
 [--version <version info>]
 [--description <description info>]
 [--eula <license text>]
 [--eulafile <filename>]

startvm <uuid|vmname>...
 [--type gui|sdl|headless|separate]

controlvm <uuid|vmname>
 pause|resume|reset|poweroff|savestate|
 acpipowerbutton|acpisleepbutton|
 keyboardputscancode <hex> [<hex> ...]|
 setlinkstate<1-N> on|off |
 nic<1-N> null|nat|bridged|intnet|hostonly|generic|
 natnetwork [<devicename>] |
 nictrace<1-N> on|off |
 nictracefile<1-N> <filename> |
 nicproperty<1-N> name=[value] |
 nicpromisc<1-N> deny|allow-vms|allow-all |
 natpf<1-N> [<rulename>],tcp|udp,[<hostip>],
 <hostport>,[<guestip>],<guestport> |
 natpf<1-N> delete <rulename> |
 guestmemoryballoon <balloonsize in MB> |
 usbattach <uuid>|<address>
 [--capturefile <filename>] |
 usbdetach <uuid>|<address> |
 clipboard disabled|hosttoguest|guesttohost|
 bidirectional |
 draganddrop disabled|hosttoguest |
 vrde on|off |
 vrdeport <port> |
 vrdeproperty <name=[value]> |
 vrdevideochannelquality <percent> |
 setvideomodehint <xres> <yres> <bpp>
 [[<display>] [<enabled:yes|no> |
 [<xorigin> <yorigin>]]] |
 screenshotpng <file> [display] |
 videocap on|off |
 videocapscreens all|none|<screen>,[<screen>...] |
 videocapfile <file>
 videocapres <width>x<height>
 videocaprate <rate>
 videocapfps <fps>
 videocapmaxtime <ms>
 videocapmaxsize <MB>
 setcredentials <username>
 --passwordfile <file> | <password>
 <domain>
 [--allowlocallogon <yes|no>] |
 teleport --host <name> --port <port>
 [--maxdowntime <msec>]
 [--passwordfile <file> |
 --password <password>] |
 plugcpu <id> |
 unplugcpu <id> |
 cpuexecutioncap <1-100>
 webcam <attach [path [settings]]> | <detach [path]> | <list>
 addencpassword <id>
 <password file>|-
 [--removeonsuspend <yes|no>]
 removeencpassword <id>
 removeallencpasswords

discardstate <uuid|vmname>

adoptstate <uuid|vmname> <state_file>

snapshot <uuid|vmname>
 take <name> [--description <desc>] [--live]
 [--uniquename Number,Timestamp,Space,Force] |
 delete <uuid|snapname> |
 restore <uuid|snapname> |
 restorecurrent |
 edit <uuid|snapname>|--current
 [--name <name>]
 [--description <desc>] |
 list [--details|--machinereadable]
 showvminfo <uuid|snapname>

closemedium [disk|dvd|floppy] <uuid|filename>
 [--delete]

storageattach <uuid|vmname>
 --storagectl <name>
 [--port <number>]
 [--device <number>]
 [--type dvddrive|hdd|fdd]
 [--medium none|emptydrive|additions|
 <uuid|filename>|host:<drive>|iscsi]
 [--mtype normal|writethrough|immutable|shareable|
 readonly|multiattach]
 [--comment <text>]
 [--setuuid <uuid>]
 [--setparentuuid <uuid>]
 [--passthrough on|off]
 [--tempeject on|off]
 [--nonrotational on|off]
 [--discard on|off]
 [--hotpluggable on|off]
 [--bandwidthgroup <name>]
 [--forceunmount]
 [--server <name>|<ip>]
 [--target <target>]
 [--tport <port>]
 [--lun <lun>]
 [--encodedlun <lun>]
 [--username <username>]
 [--password <password>]
 [--initiator <initiator>]
 [--intnet]

storagectl <uuid|vmname>
 --name <name>
 [--add ide|sata|scsi|floppy|sas|pcie]
 [--controller LSILogic|LSILogicSAS|BusLogic|
 IntelAHCI|PIIX3|PIIX4|ICH6|I82078|NVMe]
 [--portcount <1-n>]
 [--hostiocache on|off]
 [--bootable on|off]
 [--rename <name>]
 [--remove]

bandwidthctl <uuid|vmname>
 add <name> --type disk|network
 --limit <megabytes per second>[k|m|g|K|M|G] |
 set <name>
 --limit <megabytes per second>[k|m|g|K|M|G] |
 remove <name> |
 list [--machinereadable]
 (limit units: k=kilobit, m=megabit, g=gigabit,
 K=kilobyte, M=megabyte, G=gigabyte)

showmediuminfo [disk|dvd|floppy] <uuid|filename>

createmedium [disk|dvd|floppy] --filename <filename>
 [--size <megabytes>|--sizebyte <bytes>]
 [--diffparent <uuid>|<filename>
 [--format VDI|VMDK|VHD] (default: VDI)
 [--variant Standard,Fixed,Split2G,Stream,ESX]

modifymedium [disk|dvd|floppy] <uuid|filename>
 [--type normal|writethrough|immutable|shareable|
 readonly|multiattach]
 [--autoreset on|off]
 [--property <name=[value]>]
 [--compact]
 [--resize <megabytes>|--resizebyte <bytes>]
 [--move <full path to a new location>]
 clonemedium [disk|dvd|floppy] <uuid|inputfile> <uuid|outputfile>
 [--format VDI|VMDK|VHD|RAW|<other>]
 [--variant Standard,Fixed,Split2G,Stream,ESX]
 [--existing]

mediumproperty [disk|dvd|floppy] set <uuid|filename>
 <property> <value>

[disk|dvd|floppy] get <uuid|filename>
 <property>

[disk|dvd|floppy] delete <uuid|filename>
 <property>

encryptmedium <uuid|filename>
 [--newpassword <file>|-]
 [--oldpassword <file>|-]
 [--cipher <cipher identifier>]
 [--newpasswordid <password identifier>]

checkmediumpwd <uuid|filename>
 <pwd file>|-

convertfromraw <filename> <outputfile>
 [--format VDI|VMDK|VHD]
 [--variant Standard,Fixed,Split2G,Stream,ESX]
 [--uuid <uuid>]
 convertfromraw stdin <outputfile> <bytes>
 [--format VDI|VMDK|VHD]
 [--variant Standard,Fixed,Split2G,Stream,ESX]
 [--uuid <uuid>]

getextradata global|<uuid|vmname>
 <key>|enumerate

setextradata global|<uuid|vmname>
 <key>
 [<value>] (no value deletes key)

setproperty machinefolder default|<folder> |
 hwvirtexclusive on|off |
 vrdeauthlibrary default|<library> |
 websrvauthlibrary default|null|<library> |
 vrdeextpack null|<library> |
 autostartdbpath null|<folder> |
 loghistorycount <value>
 defaultfrontend default|<name>
 logginglevel <log setting>

usbfilter add <index,0-N>
 --target <uuid|vmname>|global
 --name <string>
 --action ignore|hold (global filters only)
 [--active yes|no] (yes)
 [--vendorid <XXXX>] (null)
 [--productid <XXXX>] (null)
 [--revision <IIFF>] (null)
 [--manufacturer <string>] (null)
 [--product <string>] (null)
 [--remote yes|no] (null, VM filters only)
 [--serialnumber <string>] (null)
 [--maskedinterfaces <XXXXXXXX>]

usbfilter modify <index,0-N>
 --target <uuid|vmname>|global
 [--name <string>]
 [--action ignore|hold] (global filters only)
 [--active yes|no]
 [--vendorid <XXXX>|""]
 [--productid <XXXX>|""]
 [--revision <IIFF>|""]
 [--manufacturer <string>|""]
 [--product <string>|""]
 [--remote yes|no] (null, VM filters only)
 [--serialnumber <string>|""]
 [--maskedinterfaces <XXXXXXXX>]

usbfilter remove <index,0-N>
 --target <uuid|vmname>|global

sharedfolder add <uuid|vmname>
 --name <name> --hostpath <hostpath>
 [--transient] [--readonly] [--automount]

sharedfolder remove <uuid|vmname>
 --name <name> [--transient]

guestproperty get <uuid|vmname>
 <property> [--verbose]

guestproperty set <uuid|vmname>
 <property> [<value> [--flags <flags>]]

guestproperty delete|unset <uuid|vmname>
 <property>

guestproperty enumerate <uuid|vmname>
 [--patterns <patterns>]

guestproperty wait <uuid|vmname> <patterns>
 [--timeout <msec>] [--fail-on-timeout]

guestcontrol <uuid|vmname> [--verbose|-v] [--quiet|-q]
 [--username <name>] [--domain <domain>]
 [--passwordfile <file> | --password <password>]

run [common-options]
 [--exe <path to executable>] [--timeout <msec>]
 [-E|--putenv <NAME>[=<VALUE>]] [--unquoted-args]
 [--ignore-operhaned-processes] [--profile]
 [--no-wait-stdout|--wait-stdout]
 [--no-wait-stderr|--wait-stderr]
 [--dos2unix] [--unix2dos]
 -- <program/arg0> [argument1] ... [argumentN]]

start [common-options]
 [--exe <path to executable>] [--timeout <msec>]
 [-E|--putenv <NAME>[=<VALUE>]] [--unquoted-args]
 [--ignore-operhaned-processes] [--profile]
 -- <program/arg0> [argument1] ... [argumentN]]

copyfrom [common-options]
 [--dryrun] [--follow] [-R|--recursive]
 <guest-src0> [guest-src1 [...]] <host-dst>

copyfrom [common-options]
 [--dryrun] [--follow] [-R|--recursive]
 [--target-directory <host-dst-dir>]
 <guest-src0> [guest-src1 [...]]

copyto [common-options]
 [--dryrun] [--follow] [-R|--recursive]
 <host-src0> [host-src1 [...]] <guest-dst>

copyto [common-options]
 [--dryrun] [--follow] [-R|--recursive]
 [--target-directory <guest-dst>]
 <host-src0> [host-src1 [...]]

mkdir|createdir[ectory] [common-options]
 [--parents] [--mode <mode>]
 <guest directory> [...]

rmdir|removedir[ectory] [common-options]
 [-R|--recursive]
 <guest directory> [...]

removefile|rm [common-options] [-f|--force]
 <guest file> [...]

mv|move|ren[ame] [common-options]
 <source> [source1 [...]] <dest>

mktemp|createtemp[orary] [common-options]
 [--secure] [--mode <mode>] [--tmpdir <directory>]
 <template>

stat [common-options]
 <file> [...]

guestcontrol <uuid|vmname> [--verbose|-v] [--quiet|-q]

list <all|sessions|processes|files> [common-opts]

closeprocess [common-options]
 < --session-id <ID>
 | --session-name <name or pattern>
 <PID1> [PID1 [...]]

closesession [common-options]
 < --all | --session-id <ID>
 | --session-name <name or pattern> >

updatega|updateguestadditions|updateadditions
 [--source <guest additions .ISO>]
 [--wait-start] [common-options]
 [-- [<argument1>] ... [<argumentN>]]

watch [common-options]

metrics list [*|host|<vmname> [<metric_list>]]
 (comma-separated)

metrics setup
 [--period <seconds>] (default: 1)
 [--samples <count>] (default: 1)
 [--list]
 [*|host|<vmname> [<metric_list>]]

metrics query [*|host|<vmname> [<metric_list>]]

metrics enable
 [--list]
 [*|host|<vmname> [<metric_list>]]

metrics disable
 [--list]
 [*|host|<vmname> [<metric_list>]]

metrics collect
 [--period <seconds>] (default: 1)
 [--samples <count>] (default: 1)
 [--list]
 [--detach]
 [*|host|<vmname> [<metric_list>]]

natnetwork add --netname <name>
 --network <network>
 [--enable|--disable]
 [--dhcp on|off]
 [--port-forward-4 <rule>]
 [--loopback-4 <rule>]
 [--ipv6 on|off]
 [--port-forward-6 <rule>]
 [--loopback-6 <rule>]

natnetwork remove --netname <name>

natnetwork modify --netname <name>
 [--network <network>]
 [--enable|--disable]
 [--dhcp on|off]
 [--port-forward-4 <rule>]
 [--loopback-4 <rule>]
 [--ipv6 on|off]
 [--port-forward-6 <rule>]
 [--loopback-6 <rule>]

natnetwork start --netname <name>

natnetwork stop --netname <name>

natnetwork list [<pattern>]

hostonlyif ipconfig <name>
 [--dhcp |
 --ip<ipv4> [--netmask<ipv4> (def: 255.255.255.0)] |
 --ipv6<ipv6> [--netmasklengthv6<length> (def: 64)]]
 create |
 remove <name>

dhcpserver add|modify --netname <network_name> |
 --ifname <hostonly_if_name>
 [--ip <ip_address>
 --netmask <network_mask>
 --lowerip <lower_ip>
 --upperip <upper_ip>]
 [--enable | --disable]

dhcpserver remove --netname <network_name> |
 --ifname <hostonly_if_name>

usbdevsource add <source name>
 --backend <backend>
 --address <address>
 usbdevsource remove <source name>

Introspection and guest debugging:
 VBoxManage debugvm <uuid|vmname> dumpvmcore [--filename=name]
 VBoxManage debugvm <uuid|vmname> info <item> [args...]
 VBoxManage debugvm <uuid|vmname> injectnmi
 VBoxManage debugvm <uuid|vmname> log [[--release] | [--debug]]
 [group-settings...]
 VBoxManage debugvm <uuid|vmname> logdest [[--release] | [--debug]]
 [destinations...]
 VBoxManage debugvm <uuid|vmname> logflags [[--release] | [--debug]] [flags...]
 VBoxManage debugvm <uuid|vmname> osdetect
 VBoxManage debugvm <uuid|vmname> osinfo
 VBoxManage debugvm <uuid|vmname> osdmesg [--lines=lines]
 VBoxManage debugvm <uuid|vmname> getregisters [--cpu=id] [reg-set.reg-name...]
 VBoxManage debugvm <uuid|vmname> setregisters [--cpu=id]
 [reg-set.reg-name=value...]
 VBoxManage debugvm <uuid|vmname> show [[--human-readable] | [--sh-export] |
 [--sh-eval] | [--cmd-set]] [settings-item...]
 VBoxManage debugvm <uuid|vmname> stack [--cpu=id]
 VBoxManage debugvm <uuid|vmname> statistics [--reset] [--descriptions]
 [--pattern=pattern]

Extension package management:
 VBoxManage extpack install [--replace] <tarball>
 VBoxManage extpack uninstall [--force] <name>
 VBoxManage extpack cleanup

Verbindung zu SLES (OpenSUSE) nach frischer Installation nicht möglich

Die SSH Verbindung zu einem neuen frisch installierten OpenSUSE bzw. SLES ist nich möglich.

In der OpenSUSE Installation (Version 11) ist die Verbindung von externen Systemen über SSH nicht erlaubt.

tomas@ubuntu:~$ ssh -vvvv root@sles1
OpenSSH_7.2p2 Ubuntu-4ubuntu1, OpenSSL 1.0.2g-fips  1 Mar 2016
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "sles1" port 22
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to sles1 [10.0.2.7] port 22.
debug1: connect to address 10.0.2.7 port 22: Connection timed out
ssh: connect to host sles1 port 22: Connection timed out

Schritte:

  1. Verifiziere das auf dem OpenSUSE System die Firewall für SSH geöffnet ist.  $ iptables -nL | grep 22 soll Ergebnisse liefern:
  2. Öffnen Firewall für SSH Daemon $ yast firewall und navigiere Allowed Services -> Service to Allow -> Secure Shell Server -> Add -> Next -> Finish

Um sich als root auf dem OpenSUSE Sever mit angaben von Passwort anmelden zu können, muss dies in ssh erlaubt sein (Eintrag PermitRootLogin yes).
$ vi /etc/ssh/sshd_config

PermitRootLogin yes